Automatic impact punch
Centre punch, automatic 11 x 100 mm
Register now and access more than 10,000 products
- All active parts are made from hardened tool steel
- Replaceable punch tip
- Regrindable punch tip
- Impact force can be regulated by knurled nut
- Impact force determined by spring force
- Tip hardness: 54-58 HRC
Advantages:
Pressing the handle causes a mechanism built into the impact punch to trigger a punch action. It is enough to hold the punch vertically and press the top edge. This releases the impact block and allows a marking to be punched precisely in the correct place without any risk of shifting. The further the knurled cap is screwed in, the more distinctly the marking is embossed.
The tools with different article numbers only differ in the impact force they produce.
Datasheets(X)
Tip diameter | 11 mm |
Length | 100 mm |
Last viewed
Machine tap for steel blind hole DIN 371
Reca chipboard screw pack 5 x 50-100mm
Elipse half mask respirator with p3 filters
Accessories for RECA workshop trolley, Toolmobile
arecal paint sprays, nitro-combination paint
TX/PZ impact bit set, 10 pieces
ultra EVO-S SDS-Max spade chisel
Evolution circular saw blade aluminium
1/4 inch PH recess bit
arecal Rustshock rust remover