1/2 inch sliding piece adapter
RECA 1/2-inch sliding piece adapter with cross hole for extension to T-handle
Register now and access more than 10,000 products
A T-handle is formed by inserting a 1/2" extension into the cross hole.
Can also be used as an enlarging adapter from 3/8 inch to 1/2 inch
Drive:
3/8 inch square drive with ball catch groove to DIN 3120, ISO 1174
Tip:
1/2 inch square with ball stop to DIN 3120, ISO 1174
Material:
chromium-vanadium steel
Surface:
fine satin finish
 | |
Length | 27.5 mm |
Tip size (S1) | 1/2 inch |
Drive (S2) | 3/8 inch |
Diameter (D1) | 24 mm |
Length 2 (B2) | 44 mm |
Weight | 70 g |
Diameter of hole (D) | 17 mm |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
ultra utility knife 25 mm
Stacking box
EVO HSS twist drill bit DIN 338
Conical countersink HSS
1/4-inch universal holder with quick-change chuck
Cutter replacement blade
HSS twist drill bit assortment case
ultra INOX HSS-Co twist drill bit DIN 339
arecal Power Air compressed gas spray
1/2 inch impact accessories
