Automatic impact punch
Centre punch, automatic 14 x 125 mm
Register now and access more than 10,000 products
- All active parts are made from hardened tool steel
- Replaceable punch tip
- Regrindable punch tip
- Impact force can be regulated by knurled nut
- Impact force determined by spring force
- Tip hardness: 54-58 HRC
Advantages:
Pressing the handle causes a mechanism built into the impact punch to trigger a punch action. It is enough to hold the punch vertically and press the top edge. This releases the impact block and allows a marking to be punched precisely in the correct place without any risk of shifting. The further the knurled cap is screwed in, the more distinctly the marking is embossed.
The tools with different article numbers only differ in the impact force they produce.
Datasheets(X)
Tip diameter | 14 mm |
Length | 125 mm |
Last viewed
Countersunk head screws, ISO 10642 10.9, galvanised
Dispenser
Washer, DIN 125, 200 HV, zinc plated
Machine tap for steel blind hole DIN 371
Economy skeleton gun
Washer, DIN 125, 200 HV, zinc plated
Twist drill bit, DIN 340 HSS
ultra INOX twist drill bit, DIN 338 HSS-Co
Twist drill bit, DIN 1897 HSS
Countersunk head screws, ISO 10642 10.9, galvanised