Ceramic flap wheel
Ceramic flap wheel 30 x 10 x 6 mm grain 40
Shank tools with high-performance abrasive grain
Art.-no. 0675530040
EAN 4066115442001
Register now and access more than 10,000 products
Shank tools with high-performance abrasive grain
Ceramic flap wheel with shaft is designed for maximum material removal. Optimum performance on materials that are difficult to machine (cp. steels, tool steels, stainless steel etc.). Suitable for universal use for machining all metals.
Field of Application:
Coarse and final sanding of steel, stainless steel and non-ferrous base metals. Perfect for machining in hard-to-reach places and smaller areas. Especially suited to smoothing surfaces and to finishing. Uniform grinding finish.
Advantages:
Innovative ceramic abrasive grain - aggressive grinding with high stock removal rate - consistent max performance due to self-sharpening ceramic abrasive grain
High degree of flexibility - adapts perfectly to the workpiece surface
Top Size coating - cooling agents ensure ultra-cool grinding and therefore less discolouration - particularly suitable for materials with poor heat conduction
Advice:
Please note: Pay attention to the direction of rotation! Tools are only suitable for clockwise rotation!
General working instructions:
At high rotation speeds, a coarse grain acts like a finer grain and at low rotation speeds a fine grain acts like a coarser grain.
Use tools with a low contact pressure; high contact pressure and sharp edges lead to premature wearing.
If chip removal is insufficient, do not increase the contact pressure, but instead use a coarser grain.
Datasheets(X)
Diameter | 30 mm |
Width | 10 mm |
Grid size | 40 |
Adapter diameter | 6 mm |
Recommended rotation speed | 16000 rpm |
Max. rotation speed | 25400 rpm |