Ceramic mounted point assortment, 10 pieces
Ceramic sanding tip assortment, 10 pieces, specially fused corundum
For machining steel
Art.-no.
067710
EAN 4029484303366
Prices for customers after login
Exclusively for trade customers
Register now and access more than 10,000 products
For machining steel
For machining steel
6 mm shank; pink corundum; hardness O; universal applications, dimensionally stable and with solid edges. For machining hardened and alloyed steels, tool steel
Field of Application:
Degree of hardness 0: Recommended circumferential speed when sanding edges 24-40 m/s and when sanding surfaces 15-25 m/s. These circumferential speeds are recommended for the indicated hardness levels.
Please observe the specified rotation speeds on the enclosed information slips. The circumferential speeds are indicated by green diagonal lines in the diagram. The vertical line corresponding to the tool diameter crosses the diagonal circumferential speed (diagonal). From there, the rotation speeds (in rpm) of the sanding tool and machine can be read off horizontally from the left edge.
Advice:
Example:
Mounted point dia. 20 mm
recommended circumferential speed, for degree of hardness 0 = 15-40 m/s, see table for the rotation speeds: 14,000-38,000 rpm
For materials that are difficult to machine, lower circumferential speeds are recommended as this enhances the sanding properties of the mounted point. The broad range of grain types and degrees of hardness allows all sanding work to be optimised.
Product information
Datasheets(X)
Composition of set | Cylindrical pins: 0677 010 610 6x10, 0677 010 816 8x16, 0677 011 013 10x13, 0677 011 020 10x20, 0677 011 032 10x32, 0677 011 325 13x25, 0677 011 620 16x20 |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!