RADIATOR STOP LEAK
For detailed information, other images and documents, please select individual articles from the following table.
Available in 1 version
Prices for customers after login
Exclusively for trade customers
Register now and access more than 10,000 products
Variants
Exclusively for trade customers
Register now and access more than 10,000 products
Seals hairline cracks in the radiator, engine block and cylinder heads
Protects the cooling system from leaks ensuring perfect operation
Provides long-term seal against leaks
Does not damage rubber and plastic parts of the radiator
Field of Application:
Protection of the cooling circuit and combustion chamber
In the event of leaks from hose joints or sleeves
In the event of micro-leaks in cylinder heads and engine blocks
In the event of radiator leaks
Instructions:
Check cooling fluid level. Open the heating valve completely. The engine must be at operating temperature as well as switched on. Shake the can and pour it into cooling circuit Let the engine to run for at least 10 minutes. Check the cooling fluid level and look for any air bubbles Check the system hermetic sealing. Dosage: 150 ml is enough for 10 lt of cooling fluid For lorries, use a maximum ratio of 1:100.
Advice:
Use of stop leak is not advised if cooling system filters are dirty.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!