For detailed information, other images and documents, please select individual articles from the following table.
Available in 1 version
Prices for customers after login
Register now and access more than 10,000 products
Variants
Register now and access more than 10,000 products
Possible to grind fillet welds thanks to the special design of the curved flaps. Optimum performance on materials that are difficult to machine (cp. steels, tool steels, stainless steel etc.). Suitable for universal use for machining all metals. Ideal for machining fillet welds and welding seams and for chamfering. Free from iron, chlorine and sulphur (≤ 0.1 %).
Advantages:
Special design with curved flaps
- Facilitates the sanding of fillet welds and hard-to-reach places
- Frontal sanding is also possible thanks to the abrasive flaps at a 90° angle
SPEED/REMOVAL
- Ceramic abrasive grain with self-sharpening properties
- Abrasive grains are always sharp
- Cotton/polyester abrasive cloth that can be repositioned
- Lower abrasive grain layers are used
COMFORT
- Active grinding top layer
- Lowest-temperature grinding for less discolouration
- Ceramic abrasive grain produces a more uniform grinding finish
- Little reworking required
SERVICE LIFE
- Hard and tough ceramic abrasive grain
- Microfractures in the grain
- Full synthetic resin bond
- Ceramic abrasive grain remains on the cloth until it is fully worn
- Robust abrasive cloth (cotton/polyester)
- Maximum wear resistance when machining edges
Design:
Cranked
Advice:
Angle grinder > 1000 W
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!