Welcome to RECA-UK For trade customers only
VMU plus chemical injection mortar
VMU plus chemical injection mortar - 1
VMU plus chemical injection mortar - 2
VMU plus chemical injection mortar - 3
VMU plus chemical injection mortar - 4
VMU plus chemical injection mortar - 5
VMU plus chemical injection mortar - 6
VMU plus chemical injection mortar - 7
VMU plus chemical injection mortar - 8
VMU plus chemical injection mortar - 9
VMU plus chemical injection mortar - 10
VMU plus chemical injection mortar - 11
VMU plus chemical injection mortar - 12
VMU plus chemical injection mortar - 13
VMU plus chemical injection mortar - 14
VMU plus chemical injection mortar - 15

For detailed information, other images and documents, please select individual articles from the following table.

VMU plus chemical injection mortar

The universal injection system for cracked and non-cracked concrete, solid and perforated brick masonry and retrofitted reinforcement attachment (does not apply to the 300-ml cartridge)

See product details

Available in 1 version

Prices for customers after login

Exclusively for trade customers

Register now and access more than 10,000 products

Variants

Exclusively for trade customers

Register now and access more than 10,000 products

Call customer service: 0121 525 0525

Prices for customers after login

The universal injection system for cracked and non-cracked concrete, solid and perforated brick masonry and retrofitted reinforcement attachment (does not apply to the 300-ml cartridge)


The VMU plus injection system is a bonded anchor system, comprising the two-component,
styrene free composite mortar VMU plus and various system components that must be used depending on the building material and application.

Field of Application:


For anchoring heavy loads such as steel beams, steel supports, brackets, awnings,
façades, canopies etc. in cracked and non-cracked standard concrete with a strength class ≥ C20/25 and ≤ C50/60, masonry made of solid brick and perforated brick.

Advantages:


  • One chemical injection mortar for almost all applications means more flexibility,

  • less stock and safer application

  • Approved for cracked (M 8 to M 30) and non-cracked concrete (M 8 to M 30)

  • Approved for retrofitted reinforcement attachment (dia. 8 to dia. 32)

  • Approved for use in wet concrete and drill holes filled with water (M 8 to M 16)

  • Approved for solid and perforated brick masonry

  • Approved for commercially available threaded rods with a proof of strength (acceptance test certificate 3.1)

  • Surface temperature during application: -10°C to +40°C (concrete)

  • Ambient temperature when fully cured -40°C to +120°C (in concrete)

  • Variable anchor depths for greater flexibility

  • Fire protection test

  • Opened cartridges can be used again with a new mixer nozzle

  • Styrene-free 2-component vinyl ester-based mortar

  • Approved for use during seismic activity in performance category C1 (M 8 to M 30)

  • Products bearing the NSF logo have been tested and registered by the National Sanitary Foundation (NSF). NSF is the only international registration that guarantees that the product can be used in the food industry without posing health risks


Advice:


The tubular film cartridge (0911 003 300) must be cut open before use. To do this, pull the foil on the thread outwards and cut using scissors.