Countersunk head screws, ISO 10642 A2
Countersunk head screws, ISO 10642 A2-70, hexagon socket 4 M6 x 35
Hexagon socket countersunk head screws
Register now and access more than 10,000 products
Hexagon socket countersunk head screws
Due to their head geometry, countersunk head screws have a limited load capacity according to this standard and may not meet the requirements for tensile or torsional strength. The actual mechanical properties of the screw are unchanged and comply with ISO 3506-1.
Depending on the type, these items are supplied with threading almost up to the head.
Countersinks for screw heads in accordance with DIN 7991 and ISO 10642 must comply with DIN 74 type F
Advice:
DIN 7991 has been withdrawn and replaced by ISO 10642. There is some limited similarity (Some head heights and head diameters changed | Nominal diameter M18, M22, M24 removed | Stainless steels removed | Strength classes 10.9 and 12.9 added).
Due to their head geometry, these screws can only be subjected to limited loads, see DIN EN ISO 3506-1
Datasheets(X)
 | |
Thread type x nominal diameter (d) | M6 |
Length (l) | 35 mm |
Thread length (metric thread) (b) | 18 mm |
Head height (k) | 3.72 mm |
Head diameter (dk) | 12.16 mm |
Width across flats (s) | 4 mm |
ISO | 10642 |
Material | Stainless steel A2 |
Thread type | Metric thread |
Nominal diameter | 6 mm |
Pitch (p) | 1 mm |
Head type | Countersunk head |
Last viewed
Spade chisel SDS-plus
ultra PH recess screwdriver with striking cap
Rapid tacker R 23 (type 13)
speed-tron SDS-Plus hammer drill bit
Thunderbolts Hexagon flange YP
Rapid flat-wire staple type 140
VISO system security kit for stacking cabinets
sebS pan head drilling screw w. flange, sim to DIN 7504-N galv
Ogive carbide burs
1/2 inch adapter