Drive-in plasterboard plug
Drive-in plasterboard plug screws: 3.5–4.5 mm 12 x 30 mm
Special anchor for fixings in gypsum plasterboard and lightweight panels
Register now and access more than 10,000 products
Special anchor for fixings in gypsum plasterboard and lightweight panels
The plasterboard plug is hammered into the gypsum plasterboard using a hammer. Use with chipboard screws (diameter 3.5–4.5 mm) enables components to be mounted quickly and securely.
Application area:
For fastening
electrical installations, lighting, pictures, lightweight racks etc.
to plasterboard, lightweight panels
Advantages:
Easy and quick fastening
No pre-drilling required
Centring tip for optimal setting behaviour
For wood screws dia. 3.5-4.5 mm
No twisting in the wall
Collar prevents anchor from pulling through
Anchor expands when screw is screwed in
Advice:
Suitable for plasterboard up to 12.5 mm thick.
Recommended tensile load in 12.5 mm gypsum plasterboard: 0.08 kN
Safety factor 3
Datasheets(X)
Last viewed
Refuse sack
fleece-mop flap discs
arecal dermacare apre sens
hybrid cutting disc for universal use
Hex-Plus L-shaped hex key set with holding function HF
1/4 inch HSS countersink bits with 3 cutters 90° set
Professional carpenters' pencil
1/2 inch impact sockets, short version, metric
arecal silicone spray
INOX 1/4 inch PH recess bit