EVO HSS twist drill bit DIN 338
EVO twist drill, DIN 338 HSS, 5.0 mm
Register now and access more than 10,000 products
EVO twist drill bit HSS with TRICON shaft, type N, right-hand cutting, DIN 338, HSS, ground, TiAIN head coating
Application area:
Precision drill for drilling steel up to 1000 N/mm² and cast steel (alloyed and non-alloyed), grey cast iron, malleable cast iron, spheroidal cast iron, sintered iron, nickel silver and graphite.
Advantages:
- 118° EVO blade with cross-ground section
Drilling with pin-point accuracy - no centre punch; dimensional accuracy - precise drill holes; low feed and cutting forces - energy-saving operation
- Blue ring - for steel
Simple material assignment - no confusion; suitable for machine taps and countersinks
- TiAlN head coating
Maximum service life - no built-up edges, greater surface hardness, improved thermal stability, dry machining possible; "NUR" coating on the area subjected to the greatest load - greater flexibility and more cost-effective
- TRICON shaft, positive-fit transmission of forces
No movement in the drill chuck - optimal power transfer/no groove formation; no excessively deep clamping in the drill chuck - optimal elasticity; low energy expenditure when opening and closing the drill chuck - protects the drill chuck
Advice:
From 4.0 mm with TRICON shaft
Datasheets(X)
Diameter | 5.0 |
Length | 86 |
Chip flute length | 52 |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
