EXTREME plus twist drill bit
EXTREME Plus twist drill bit DIN 338 HSS-Co 4.0 mm
The drill bit for the toughest materials
Register now and access more than 10,000 products
The drill bit for the toughest materials
For hand drills and stationary power tools, DIN 338 type H, right-hand cutting, ground, multi-layer (TiAlN)-ZrN coating, HSS-Co 8%
Field of Application:
Suitable for HARDOX® 500 (for HARDOX 550 preliminary testing is required) and for very hard materials up to 1700 N/mm² such as excavator shovels, lorry superstructures, snowploughs, agricultural machines, armour plating etc. Materials up to 1400 N/mm² can be processed using hand drills.
Advantages:
135° turbo cutter with cross thinning
- Precise tapping
- No centre punching necessary
- Optimal drilling progress
- Drilling on curved surfaces
Robust, sturdy and long-lasting
- HSS-Co 8% - M42 cutting material — extremely long service life
- Short groove with reinforced core — maximum stability
- Narrow drill heel for the lowest friction resistance — robust — low risk of breakage
Surface coating
- Multi-layer ZrN coating (zirconium nitride)
- Increased surface hardness
- Prevents built-up edges
- Enhances thermal stability
Advice:
Prerequisites for drilling HARDOX®:
Stability is crucial. Hand drills are not suitable for drilling Hardox.
Minimise the distance between the drill bit and the workpiece and clamp the workpiece firmly.
Reduce the feed rate shortly before drilling through and ensure recommended feed rate and cutting speed are maintained.
Datasheets(X)
Diameter | 4.0 mm |
Length | 75 mm |
Chip flute length | 22.0 mm |
Last viewed
ultra INOX HSS-Co twist drill bit DIN 338
Inlay for empty case
ultra HSS-O twist drill bit
Nylon plugs
Hexagon head bolt with locking teeth, similar to DIN 6921 8.8, zinc-plated
D/i-Mop flap disc
TELESCOPIC copper pipe cutter 3-35 mm
Nylon plugs
Cutting disc for stone
ultra slotted screwdriver with striking cap