EXTREME plus twist drill bit
EXTREME Plus twist drill bit DIN 338 HSS-Co 13.0 mm
The drill bit for the toughest materials
Register now and access more than 10,000 products
The drill bit for the toughest materials
For hand drills and stationary power tools, DIN 338 type H, right-hand cutting, ground, multi-layer (TiAlN)-ZrN coating, HSS-Co 8%
Field of Application:
Suitable for HARDOX® 500 (for HARDOX 550 preliminary testing is required) and for very hard materials up to 1700 N/mm² such as excavator shovels, lorry superstructures, snowploughs, agricultural machines, armour plating etc. Materials up to 1400 N/mm² can be processed using hand drills.
Advantages:
135° turbo cutter with cross thinning
- Precise tapping
- No centre punching necessary
- Optimal drilling progress
- Drilling on curved surfaces
Robust, sturdy and long-lasting
- HSS-Co 8% - M42 cutting material — extremely long service life
- Short groove with reinforced core — maximum stability
- Narrow drill heel for the lowest friction resistance — robust — low risk of breakage
Surface coating
- Multi-layer ZrN coating (zirconium nitride)
- Increased surface hardness
- Prevents built-up edges
- Enhances thermal stability
Advice:
Prerequisites for drilling HARDOX®:
Stability is crucial. Hand drills are not suitable for drilling Hardox.
Minimise the distance between the drill bit and the workpiece and clamp the workpiece firmly.
Reduce the feed rate shortly before drilling through and ensure recommended feed rate and cutting speed are maintained.
Datasheets(X)
Last viewed
Mirka Abranet 70 x 198 strip
HSS DIN 338 twist drill bit
Cleaning brush made from stainless steel wire
Rounded roller carbide burs
HSS DIN 1897 twist drill bit
Hammer drill bit x-twin ultra
Cloth sanding belts aluminium oxide
Hammer drill bit x-twin ultra
Hammer drill bit x-twin ultra
Hammer drill bit x-twin ultra