Flap wheel with shaft
Flap wheel with shaft, abrasive fleece, grain 180 40 x 20 x 6 mm
Register now and access more than 10,000 products
Field of Application:
Finish on stainless steel, steel and non-ferrous base metals.
For removing oxides and discolouration.
Produces a highly uniform surface with a high sheen.
Advantages:
- Very gentle working
Advice:
Please note: Pay attention to the direction of rotation! Tools are only suitable for clockwise rotation!
General working instructions:
At high rotation speeds, a coarse grain acts like a finer grain and at low rotation speeds a fine grain acts like a coarser grain.
Use tools with a low contact pressure; high contact pressure and sharp edges lead to premature wearing.
If chip removal is insufficient, do not increase the contact pressure, but instead use a coarser grain.
Diameter | 40.0 mm |
Width | 20.0 mm |
Fleece grid size | 180 |
Adapter diameter | 6 mm |
Recommended rotation speed | 7500 rpm |
Max. rotation speed | 14000 rpm |
Datasheets (0)
Certificates/ Documents (0)
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
