HSSX-O TIP TOP twist drill bit
TIP TOP twist drill bit DIN 338 HSSX-O 1.0-10.0 mm
The universal model
Art.-no.
0619004910
EAN 4029484952359
Prices for customers after login
Exclusively for trade customers
Register now and access more than 10,000 products
The universal model
The twist drill bit with TIP TOP tip
Field of Application:
Steel, stainless steel, aluminium, plastic, non-ferrous metals, cast iron, unalloyed heat-treated steels, hardwood and softwood etc.
Advantages:
Tip Top tip (from diameter 3.0 mm)
- Precise centring - the drill almost never runs off centre and it is even possible to perform angled spot drilling
- Rapid drilling progress - multiple cutting edges in use at the same time
- Circular holes even in sheet metal machining
- Simple drilling - minimal energy expenditure required
- Does not hook into the material - makes drilling out existing holes effortless
Latest generation - HSSX base material
- Maximum flexibility and heat strengthening in one tool
- Even more universal - more material types can be processed
Surface
- The multifunctional steam oxide (Fe2 O4) coating is an adhesive oxide coating with a thickness of 0.010 mm and offers the following advantages:
- Improved adhesion of cooling lubricant on the tool surface prevents built-up edges and cold welds.
- Improves chip discharge from the cutter - reduces heat development in the critical zone.
- Increased surface hardness means improved wear resistance.
TRICON shank (from diameter 4.0 mm)
- Prevents spinning in the drill chuck - therefore no damage to the drill
- Mechanical interlock in the drill chuck - securely and firmly clamped, particularly in quick-action drill chucks
- Optimal power transmission to the tip where the power is needed
Advice:
Tip Top tips of 3.0 mm and above. TRICON shanks of 4.0 mm and above
Product information
Datasheets(X)
Composition of set | 1.0-10 mm; 19 pieces |