Hammerset anchor ES steel, zinc-plated
Hammerset anchor ES steel, zinc-plated, with collar M 12x50
For the multiple attachment of non-load-bearing systems in cracked and non-cracked concrete
Register now and access more than 10,000 products
For the multiple attachment of non-load-bearing systems in cracked and non-cracked concrete
The hammerset anchor E is a drop-in anchor for anchoring in concrete.
The anchor is set into the drill hole in cotter-pin installation and reliably expanded using a manual or mechanical spreading tool and can be loaded straight away. The mounting can easily be loosened again.
No need for installation torque.
Application area:
For securing
Suspended items in heating, sanitation and ventilation, anchoring with threaded rods and bolts, flat steel, profiled steel
in concrete with a strength class ≥ C20/25 and ≤ C50/60.
Load range: 1.2 kN–28.6 kN.
Advantages:
- Small drill hole depth, high load-bearing capacity
- Permitted as single anchors for fixing in non-cracked concrete, with an anchoring depth ≥ 30 mm
- Labour-saving and quick assembly through stop bit and attachable tool
- Immediate load-bearing capacity - no waiting
- Fixings can be removed from the flush-mounted anchor
Design:
With plunged boss
With collar
Advice:
Fire protection tested in concrete C20/25 to C50/60.
Datasheets(X)
Type description | ES, zinc-plated, M 12 |
Anchor diameter x anchor length (l) | 12 x 18 mm |
Nominal drill-bit diameter (d 0) | 15 mm |
Drill hole depth (h 0) | 50 mm |
Anchor length (l) | 18 mm |
Effective anchoring depth (h ef) | 50 mm |
Design | With plunged boss, With collar |
Material | Steel |
Surface | Zinc plated |
Anchor diameter | 12 mm |
Min. edge clearance (c min) | 165 mm |
Min. centre-to-centre distance (s min) | 120 mm |
Through-hole in the component to be connected (d f) | 14 mm |
Torque during anchoring (T inst) | 35 Nm |
Last viewed
ultra HSS-O twist drill bit
Reca chipboard screw bulk pack 5 x 70mm
Hexagon bolt 10 x 30 package
Bit holder 1/4", E 6.3
Dip-insulated mechanics' nippers (construction worker's pincers or end cutting nippers)
Reca chipboard screw bulk pack 4 x 50mm
Ejector drift for morse taper
Quintus pliers
SCARBULB PREMIUM BULB H7 12V
Cleaning brush made from stainless steel wire