Large-head blind rivet, aluminium/steel
Large-head blind rivet, alu/st, bore Ø 4.1, clamping range: 6.5-8.5 mm 4.0x12.0
Register now and access more than 10,000 products
Application area:
Blind riveting is a joining technique that saves time and reduces costs. It is particularly suitable for connections that can only be accessed from one side. Practically any installation location can be catered for using different material combinations for the riveting mandrel and rivet body.
 | |
Rivet diameter (d) | 4.0 mm |
Shaft length (l) | 12.0 mm |
Min./max. grip range | 6.5-8.5 mm |
Head diameter (dk) | 12 mm |
Head height max. (k) | 2.5 mm |
Drill diameter | 4.1 mm |
Tensile fracture load | 1600 N |
Shear-fracture load | 1200 N |
Material of mandrel | Steel |
Material of sleeve | Aluminium, AlMg 3.0 |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Hand protection for universal chisel
arecal Rustshock rust remover
Harris ultimate brushes for walls & ceilings, set
EXTREME mounts for hole saws
ultra slotted screwdriver with striking cap
Hammer drill bit x-twin ultra
ultra aluminium soft-face hammer
HLR500 S head torch
Hexagon head bolt with locking teeth, similar to DIN 6921 8.8, zinc-plated
VDE sheath stripping pliers
