Lift assembly cushion
RECA Lift assembly cushion
Register now and access more than 10,000 products
The RECA "Lift" assembly cushion is used to ensure rapid fixing and stand-off installation when installing windows. It can also be used when adjusting heavy doors, and when aligning cabinets and washing machines.
Made from fibre-reinforced plastic.
Load-bearing capacity: 135 kg per cushion.
Joint width: 3-50 mm.
Simple and precise adjustment of windows, cabinets, doors and heavy devices such as washing machines.
Soft air cushion prevents scrapes or scratches, e.g. on doors and frames.
No wedges required - the cushions can be used again and again!
Clear joints - joints can be immediately filled with the tape and joint compound; no need for irritating wedges.
Datasheets(X)
Load-carrying capacity | 135 kg |
Length x width | 160 x 150 mm |
Min./max. joint width | 3-50 mm |
Weight | 70 g |
Last viewed
Spade chisel SDS-max
Cut-resistant glove PROTECT 202
HSS-Co twist drill bit DIN 1897
Hammer drill bit x-twin ultra
VISO case 4.4.x T transparent/empty
HSS DIN 1897 twist drill bit
MULTI VDE screwdriver blades
Slotted screwdriver with wooden handle
Spade chisel SDS-plus
Countersunk head screws, ISO 10642 A2