MULTI-MONTI-plus zinc-plated steel screw anchor, MMS-plus-SS hexagon head with pressed-on washer
MULTI-MONTI-plus MMSplus-SS screw anchor, hex head 20x200/60
Drill, screw in, done
Register now and access more than 10,000 products
Drill, screw in, done
The concrete screw anchor is an innovative anchoring system for securing assembly parts to concrete and other solid masonry. With its cutting-teeth design, the concrete screw anchor cuts a thread in the drill hole as it is screwed in, creating a connection with mechanical interlocking and no expansion pressure.
Application area:
For securing
staircase railings, grilles, beams, brackets, metal structures, formwork supports, cable conduits, pipes, mounting rails, ventilation ducts, suspended ceilings, sprinkler systems etc.
to
normal weight concrete with a strength class of at least C20/25 and up to maximum C50/60, solid sand-lime brick, hollow sand-lime brick, masonry brick and lightweight concrete.
Advantages:
- Approved for use in masonry (note types and dimensions)
- Shallow drill hole depths and small drill hole diameters
- Cutting teeth at the fore of the anchor ensure minimal tightening torque
- No expansion effect, hence minimal spacing and edge distance
- Quick and simple in-place installation, can be easily inserted by mechanical means
- Immediate load-bearing capacity - no waiting
- Fastening can be fully removed again
- No torque control required
- Broad range of uses due to numerous versions
- Attractive design with countersunk hexagon head
Advice:
Thanks to the testing sleeves 0901 000 010/012/016/020, the concrete screw anchors in diameters 10-20 can be used multiple times for temporary fastenings. (Note the types and dimensions)
Datasheets(X)
 | |
Type description | MMS-plus hexagon head with pressed-on washer |
Anchor diameter x anchor length (l) | 20 x 200 mm |
Nominal drill-bit diameter (d 0) | 18 mm |
Drill hole depth (h 1) | 160 mm |
Max. attachment height (t fix) | 60 mm |
Head height | 14 mm |
Surface | Zinc plated |
Material | Steel |
External drive | WS24 |
Approval | Yes |
Washer diameter | 38 mm |
Embedding depth (h nom2) | 140 mm |
Effective anchoring depth (h ef) | 114 mm |
Min. centre-to-centre distance (s min) | 80 mm |
Min. edge clearance (c min) | 80 mm |
Minimum component thickness for concrete (h min) | 180 mm |
Through-hole in the component to be connected (d f) | 23 mm |
Max. recommended power output for setting tool | 800 Nm |
Last viewed
TiN-coated HSS combination drill bit set
EVO HSS twist drill bit DIN 338
Zirconia alumina sanding belt
RECA combination ratchet spanner, Varius, straight
Shield anchor bolt type
Flap wheel with shaft
VISO assortment tapping screws DIN 7981
Hex head self drilling screws with washer LS
Hexagonal bolt DIN 933 8.8, galvanised
HM Plastic 3.3 mm jigsaw blade