Machinist's try square DIN ISO 2768
Engineer's try square DIN ISO 2768 1000 x 500 mm
Register now and access more than 10,000 products
Manufactured in accordance with DIN ISO 2768m (previously DIN 768m).
m = medium (mechanical engineering standard).
Made from zinc-plated carbon steel.
Advice:
Welded angle square!
Limb length (Schenkellänge) | 1000 mm |
Limb length 2 (Schenkellänge 2) | 500 mm |
Width | 30 mm |
Datasheets(X)
Last viewed
x-tron ultra SDS-Max 4-cutter hammer drill bit
Clamping locking pliers, form C
2C T-handle hex key, hexagon socket HEX
2C T-handle hex key, hexagon socket HEX
Hermes self stick discs silicone carbide 150mm
POWER SYSTEM 3/8 inch socket inserts, drilled
Cylinder head screw, DIN 912, 8.8, zinc plated
Cylinder head screw, DIN 912, 8.8, zinc plated
Particle boards screw, csk head with end mill ZP
Varius straight ratcheting combination wrench
