Machinist's try square DIN ISO 2768
Engineer's try square DIN ISO 2768 500 x 280 mm
Register now and access more than 10,000 products
Manufactured in accordance with DIN ISO 2768m (previously DIN 768m).
m = medium (mechanical engineering standard).
Made from zinc-plated carbon steel.
Advice:
Welded angle square!
Limb length (Schenkellänge) | 500 mm |
Limb length 2 (Schenkellänge 2) | 280 mm |
Weight | 1160 g |
Width | 25 mm |
Thickness | 5 mm |
Datasheets(X)
Last viewed
Hexagonal bolt DIN 933 8.8, galvanised
Long L-shaped hex key, hexagon on one end with ball head
1/2 inch sockets, short version, metric with hexagon drive
Hexagon bolt with shank, DIN 931 10.9, plain
EVO HSS twist drill bit DIN 338
ultra HSS-O twist drill bit
Stretch films
Penny washer, tolerance DIN 522-A, zinc plated
Washer, DIN 125, 200 HV, plain
sebS A2 pan head PH self-drilling screw, similar to DIN 7504-N
