RADIATOR CLEANER

Suitable for all engine types
Ensures optimum performance and increased safety in the cooling system's operation
Eliminates corrosion and dirt deposits in the cooling system
Neutralises calcium residues that may lead to formation of limescale
Dissolves and binds oily residues and greases
Alkaline in the range 9-11 (pH): does not damage plastics, rubber and metals

Field of Application:

In the event of dirt deposits in the cooling system following repair work on the engine, such as oil residues.
In the event of dirt deposits in the cooling system
As a preventive measure at each coolant change

Instructions:

Shake the bottle well and add the contents to the cooling system
Open the heating valves
Run the engine for about 30 minutes
Deposits removed by the cleaner must be rinsed with clean water
Rinsing is done without removing the thermostat
Parts damaged due to oil saturation, such as water pipes, should be replaced
After cleaning, fill with coolant, flush the new coolant through and check for leaks
Dosage: Use 250 ml for 10 L of coolant; use 1 L for 40 L of coolant

Advice:

If the radiator has small holes filled with calcium residues, using the cleaner to eliminate these residues can cause the holes to emerge. The radiator leak sealant can then be used to seal the micro-cracks.