RAPID® timber screw with countersunk head, yellow
RAPID timber screw, c/s milling pocket head, Yellwin 500+, FT, TX 10 3.0x25
Diameter 3.0 mm-10.0 mm
Register now and access more than 10,000 products
Diameter 3.0 mm-10.0 mm
Field of Application:
Universal use, interior finishing, construction of roofs, furniture and elements, structural wood construction, over-rafter insulation. Wherever chipboard screws and timber screws are used.
Advantages:
- European Technical Assessment (ETA-12/0373). From diameter 4.0 mm
- HiLo thread - reduced screw-in times and high technical values
- Patented friction part for lower screw-in resistance and longer battery life for screw-in units
- Patented tip with ridged core for precise and immediate application and reduced splitting effect
- Milling pocket head provides fast, clean countersinking and prevents the wood from splitting.
- Fewer bit changes - one drive size for dia. 3.5-5.0 mm (TX20)
- Additional drive size for dia. 5 mm (TX 25 carpentry)
- Premium surface Yellwin 500+. Up to ten-times greater corrosion protection in comparison to standard zinc-plated coatings on the market (iridescent blue)
Advice:
Do not use the screw in applications with direct exposure to the weather or in wet rooms with atmospheres containing chlorine gas.
Datasheets(X)
 | |
Nominal diameter | 3 mm |
Length (l) | 25 mm |
Head type | Countersunk milling pocket head |
Head diameter (s) | 6 mm |
Internal drive | TX10 |
Thread type | Wood screw thread |
Thread design | Full thread |
End milling cutter | No |
Thread form | Single start thread |
Material | Steel |
Surface | Zinc plated thick-layer passivation |
Last viewed
Stud anchor, A4
Rapid tacker R 34 (type 140)
VISO case 4.4.x T transparent/empty
RECA MULTI screwdriver blades
VISO case 8.4.x TR incl. empty boxes/empty
VISO system wall bracket
Hexagon bolt 10 x 30 package
RAPID® timber screw with countersunk head, yellow
Hikoki ETA36J0Z mains adaptor 240v
RAPID® timber screw with countersunk head, yellow