RAPID® timber screw with countersunk head, yellow
RAPID timber screw, c/s milling pocket head, Yellwin 500+, FT, TX 20 3.5x20
Diameter 3.0 mm-10.0 mm
Register now and access more than 10,000 products
Diameter 3.0 mm-10.0 mm
Field of Application:
Universal use, interior finishing, construction of roofs, furniture and elements, structural wood construction, over-rafter insulation. Wherever chipboard screws and timber screws are used.
Advantages:
- European Technical Assessment (ETA-12/0373). From diameter 4.0 mm
- HiLo thread - reduced screw-in times and high technical values
- Patented friction part for lower screw-in resistance and longer battery life for screw-in units
- Patented tip with ridged core for precise and immediate application and reduced splitting effect
- Milling pocket head provides fast, clean countersinking and prevents the wood from splitting.
- Fewer bit changes - one drive size for dia. 3.5-5.0 mm (TX20)
- Additional drive size for dia. 5 mm (TX 25 carpentry)
- Premium surface Yellwin 500+. Up to ten-times greater corrosion protection in comparison to standard zinc-plated coatings on the market (iridescent blue)
Advice:
Do not use the screw in applications with direct exposure to the weather or in wet rooms with atmospheres containing chlorine gas.
Datasheets(X)
 | |
Nominal diameter | 3.5 mm |
Length (l) | 20 mm |
Head type | Countersunk milling pocket head |
Head diameter (s) | 7 mm |
Internal drive | TX20 |
Thread type | Wood screw thread |
Thread design | Full thread |
End milling cutter | No |
Thread form | Single start thread |
Material | Steel |
Surface | Zinc plated thick-layer passivation |
Last viewed
RAPID® timber screw with countersunk head, yellow
arecal Weldspray welding aid
EVO HSS twist drill bit DIN 338
Hammerset anchor E, steel, galvanised
HSS DIN 1897 twist drill bit
Double ended drill bit HSS
HSS DIN 340 twist drill bit
Setting tool for E-SW hammerset anchor
RECA Varius ratchet spanner set, straight
Washer, DIN 125 140 HV A2