RAPID® timber screw with countersunk head, yellow
RAPID timber screw underhead splines, Yellwin 500+, PT, TX 50 10.0x200/100
Diameter 3.0 mm-10.0 mm
Register now and access more than 10,000 products
Diameter 3.0 mm-10.0 mm
Field of Application:
Universal use, interior finishing, construction of roofs, furniture and elements, structural wood construction, over-rafter insulation. Wherever chipboard screws and timber screws are used.
Advantages:
- European Technical Assessment (ETA-12/0373). From diameter 4.0 mm
- HiLo thread - reduced screw-in times and high technical values
- Patented friction part for lower screw-in resistance and longer battery life for screw-in units
- Patented tip with ridged core for precise and immediate application and reduced splitting effect
- Milling pocket head provides fast, clean countersinking and prevents the wood from splitting.
- Fewer bit changes - one drive size for dia. 3.5-5.0 mm (TX20)
- Additional drive size for dia. 5 mm (TX 25 carpentry)
- Premium surface Yellwin 500+. Up to ten-times greater corrosion protection in comparison to standard zinc-plated coatings on the market (iridescent blue)
Advice:
Do not use the screw in applications with direct exposure to the weather or in wet rooms with atmospheres containing chlorine gas.
Datasheets(X)
 | |
Nominal diameter | 10 mm |
Length (l) | 200 mm |
Head type | Countersunk milling head |
Head diameter (s) | 18.5 mm |
Internal drive | TX50 |
Thread type | Wood screw thread |
Thread design | Partial thread |
End milling cutter | Yes |
Thread form | Hilo, double start |
Thread length (thread for woodwork) (b) | 100 mm |
Material | Steel |
Surface | Zinc plated thick-layer passivation |
Approval | ETA-12/0373 |
Last viewed
Twist drill bit HSS-Co long DIN 340
RECA combination ratchet spanner, Varius, straight
RECA combination ratchet spanner, Varius, straight
ultra INOX HSS-Co twist drill bit DIN 338
Thunderbolt countersunk torx YP
Cone grease nipple H1, type A
HSS-Co twist drill bit DIN 1897
1/4-inch angled screwdriver attachment, E 6.3
SL 200 split cowhide leather protective glove
Hammer core drill bit ratio - adapters and accessories