RECA Lift assembly cushion
RECA Lift assembly cushion
Register now and access more than 10,000 products
The RECA "Lift" assembly cushion is used to ensure rapid fixing and the correct spacing when installing windows. It can also be used when adjusting heavy doors, and when aligning cabinets and washing machines.
Made from fibre-reinforced plastic.
Load-bearing capacity: 135 kg per cushion.
Joint width: 3–50 mm.
Simple and precise adjustment of windows, cabinets, doors and heavy devices such as washing machines.
Prevents marks and scratches on doors and casings by providing a soft air cushion.
No wedges required — the cushions can be used again and again!
Clear joints — joints can be immediately filled with the tape and joint compound; no need for irritating wedges.
Datasheets(X)
Load-carrying capacity | 135 kg |
Length x width | 160 x 150 mm |
Min./max. joint width | 3-50 mm |
Weight | 70 g |
Last viewed
Quintus pliers
FFP3 M120 V NR D cup-shaped mask
arecal MARKER USD Basic, marking spray
Pipe and water pump pliers set, 3 pieces
Stud anchor, A4
Sanding belt carrier with shaft for drum sanding belts
Accessories for hammer drill bit
arecal Thermo 1200 lubricant
HSS DIN 338 twist drill bit
Zip and fix