Rivet nuts, countersunk head, aluminium
Rivet nut, countersunk head, alu, bore Ø 9.0, clamping range 1.5–4.0 mm, M6
Register now and access more than 10,000 products
Blind rivet nuts combine two types of fastening:
1. Rivet connection of two materials when used as a rivet.
2. Creation of a screw thread without the need for thread cutting.
Advantages:
- Creation of a thread even in thin-walled materials where thread cutting is not possible
- Access from one side; inside does not have to be accessible
- Screw connection produces the same values as a thread cut in a solid material
Datasheets(X)
 | |
Suitable for screw | M6 |
Rivet diameter (d) | 8.9 mm |
Shaft length (l) | 15.5 mm |
Min./max. grip range | 1.5-4.0 mm |
Head diameter (dk) | 11.5 mm |
Head height (k) | 1.5 mm |
Drill diameter | 9.0 mm |
Tensile fracture load | 9300 N |
Shear-fracture load | 2280 N |
Last viewed
Washer, DIN 125 140 HV A2
Screw extractor set 2-way cutter
First fix framing nails Galv
Silicone carbide paper roll
INOX 1/4 inch PH recess bit
HSS DIN 340 twist drill bit
TX/PZ impact bit set, 10 pieces
RAPID® timber screw with countersunk head, yellow
Shield anchor bolt type
diadrill 1/2 inch wet diamond core drill bit, usable length 320 mm