Screw extractor set
Screw extractor set M3-45
Register now and access more than 10,000 products
For extracting broken screws and stud bolts without damaging the threads.
Hardened chromium-vanadium steel, burnished surface.
Advice:
Required drill diameter for metric screws:
M 3-6 = 1.8 mm
M 6-8 = 2.6 mm
M 8-11 = 3.7 mm
M 11-14 = 5.5 mm
M 14-18 = 7.0 mm
M 18-24 = 11.0 mm
M 24-33 = 14.0 mm
M 33-45 = 21 mm
Datasheets(X)
Content remark | 1 extractor of each: M3-6/M6-8/M8-11/M11-14/M14-18/M18-24/M24-33/M33-45 |
Last viewed
Cylinder wire brush, steel wire, for angle grinder
Twist drill bit HSS-Co long DIN 340
RAPID® timber screw with countersunk head, yellow
x-twin ultra SAFE hammer drill bit
ultra EVO-S SDS-Plus point chisel
HEX 30 hexagon flat chisel
HM Plastic 3.3 mm jigsaw blade
SDS-plus point chisel
Drill hole marker
Turboinox backing pad for vulcanised fibre discs