Split pin, DIN 94, zinc plated
Split pin, DIN 94, galvanised, 1.6 x 20
Register now and access more than 10,000 products
Field of Application:
For securing castellated nuts in conjunction with bolts or threaded pins with split pin hole.
For securing split pin bolts.
Advice:
Do not use the split pins in applications with direct exposure to the weather or in wet rooms with atmospheres containing chlorine gas.
 | |
Length of head (b) | 3.2 mm |
Thickness | 1.6 mm |
Length (l) | 20 mm |
Diameter (d1) | 1.6 mm |
DIN | 94 |
Width of head (c) | 2.8 mm |
Length between two pins of a splint (a) | 2.5 mm |
Material | Steel |
Surface | Zinc plated |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Tapping screw assortment case DIN 7982
sebS zinc-plated countersunk head self-drilling screw for window installation, similar to DIN 7504-P-H
EVO HSS twist drill bit DIN 338
speed-tron SDS-Plus hammer drill bit
EVO HSS twist drill bit DIN 338 - cassettes
1/4 inch PH recess dry walling bit
Hexagon-head wood screw, DIN 571, A2
Conical countersink HSS
EVO HSS twist drill bit DIN 338
Cleaning brush made from stainless steel wire
