Stud anchor, galvanised steel
B stud anchor, galvanised steel, M10 x 50-56/125
The perfect anchor for quick, reliable fixings in uncracked concrete and for suspended ceilings
Art.-no. 0909010050
EAN 4043315002617
Register now and access more than 10,000 products
The perfect anchor for quick, reliable fixings in uncracked concrete and for suspended ceilings
Application area:
For securing
supports, beams, metal structures, brackets, cable conduits, mounting rails, suspended ceilings etc.
to
non-cracked standard concrete with a strength class of ≥ C20/25 and ≤ C50/60.
Advantages:
- High permissible loads with low centre-to-centre distances and edge distances
- Quick and easy in-place installation
- Long thread for flexible use with various clamping widths
- Permissible reduced anchorage depths, e.g. in reinforced concrete or under reduced load
- Three effective anchorage depths for flexible use
Advice:
* Not covered by the approvals, ** Increased clamping widths at reduced anchorage depths with lesser loads
Datasheets(X)
Type description | B 10, 50-56/125 |
Anchor diameter x anchor length (l) | 10 x 125 mm |
Max. attachment height (t fix) | 50 mm |
Max. attachment height reduced (t fix, red) | 56 mm |
Nominal drill-bit diameter (d 0) | 10.00 mm |
Drill hole depth (h 1) | 70 mm |
Drill hole depth reduced (h 1, red) | 65 mm |
Embedding depth (h nom) | 62 mm |
Embedding depth (h nom,red) | 56 mm |
Effective anchoring depth (h ef) | 48 mm |
Effective anchoring depth reduced (h ef, red) | 42 mm |
Thread diameter x thread length (metric thread) | 10 x 80 mm |
Width across flats | 17 mm |
Material | Steel |
Material of bracing clip | Stainless steel A2 |
Surface | Zinc plated |
Anchor diameter | 10 mm |
Anchor length (l) | 125 mm |
Thread diameter | 10 mm |
Thread length (metric thread) | 80 mm |
Length | 125.0 mm |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Set screw assortment case DIN 913/914
ultra steel twist drill bit
Countersunk head chipboard screw, yellow zinc plated, TX
sebS hexagon-head drilling screw with sealing washer, galvanised
Proflex cutting disc - flat
Hexagonal bolt DIN 933 8.8, galvanised
Grey alkyd primer
45° elbow pipe wrench DIN 5234, shape B
ultra HSS-O twist drill bit
sebS drilling screw, PH pan head, sim. to DIN 7504-N galv