Stud anchor, galvanised steel
B stud anchor, galvanised steel, M12 x 20-35/115
The perfect anchor for quick, reliable fixings in uncracked concrete and for suspended ceilings
Register now and access more than 10,000 products
The perfect anchor for quick, reliable fixings in uncracked concrete and for suspended ceilings
Application area:
For securing
supports, beams, metal structures, brackets, cable conduits, mounting rails, suspended ceilings etc.
to
non-cracked standard concrete with a strength class of ≥ C20/25 and ≤ C50/60.
Advantages:
- High permissible loads with low centre-to-centre distances and edge distances
- Quick and easy in-place installation
- Long thread for flexible use with various clamping widths
- Permissible reduced anchorage depths, e.g. in reinforced concrete or under reduced load
- Three effective anchorage depths for flexible use
Advice:
* Not covered by the approvals, ** Increased clamping widths at reduced anchorage depths with lesser loads
Datasheets(X)
Type description | B 12, 20-35/115 |
Anchor diameter x anchor length (l) | 12 x 115 mm |
Max. attachment height (t fix) | 20 mm |
Max. attachment height reduced (t fix, red) | 35 mm |
Nominal drill-bit diameter (d 0) | 12 mm |
Drill hole depth (h 1) | 90 mm |
Drill hole depth reduced (h 1, red) | 75 mm |
Embedding depth (h nom) | 82 mm |
Embedding depth (h nom,red) | 67 mm |
Effective anchoring depth (h ef) | 65 mm |
Effective anchoring depth reduced (h ef, red) | 50 mm |
Thread diameter x thread length (metric thread) | 12 x 70 mm |
Width across flats | 19 mm |
Material | Steel |
Material of bracing clip | Stainless steel A2 |
Surface | Zinc plated |
Anchor diameter | 12 mm |
Anchor length (l) | 115 mm |
Thread diameter | 12 mm |
Thread length (metric thread) | 70 mm |
Length | 115 mm |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
RECA combination ratchet spanner, Varius, straight
ultra INOX HSS-Co twist drill bit DIN 338
V-P bonded anchor cartridges
HSS DIN 340 twist drill bit
ultra through hole machine tap
Rapid hammer tacker R 311 (type 140)
HSS twist drill bit set DIN 338
Illbruck MT480 high grip solvent free
1/4-inch angled screwdriver attachment, E 6.3
V-P bonded anchor cartridges