Stud anchor, galvanised steel
B stud anchor, galvanised steel, M12 x 30–45/125
The perfect anchor for quick, reliable fixings in uncracked concrete and for suspended ceilings
Register now and access more than 10,000 products
The perfect anchor for quick, reliable fixings in uncracked concrete and for suspended ceilings
Application area:
For securing
supports, beams, metal structures, brackets, cable conduits, mounting rails, suspended ceilings etc.
to
non-cracked standard concrete with a strength class of ≥ C20/25 and ≤ C50/60.
Advantages:
- High permissible loads with low centre-to-centre distances and edge distances
- Quick and easy in-place installation
- Long thread for flexible use with various clamping widths
- Permissible reduced anchorage depths, e.g. in reinforced concrete or under reduced load
- Three effective anchorage depths for flexible use
Advice:
* Not covered by the approvals, ** Increased clamping widths at reduced anchorage depths with lesser loads
Datasheets(X)
Type description | B 12, 30-45/125 |
Anchor diameter x anchor length (l) | 12 x 125 mm |
Max. attachment height (t fix) | 30 mm |
Max. attachment height reduced (t fix, red) | 45 mm |
Nominal drill-bit diameter (d 0) | 12 mm |
Drill hole depth (h 1) | 90 mm |
Drill hole depth reduced (h 1, red) | 75 mm |
Embedding depth (h nom) | 82 mm |
Embedding depth (h nom,red) | 67 mm |
Effective anchoring depth (h ef) | 65 mm |
Effective anchoring depth reduced (h ef, red) | 50 mm |
Thread diameter x thread length (metric thread) | 12 x 80 mm |
Width across flats | 19 mm |
Material | Steel |
Material of bracing clip | Stainless steel A2 |
Surface | Zinc plated |
Anchor diameter | 12 mm |
Anchor length (l) | 125 mm |
Thread diameter | 12 mm |
Thread length (metric thread) | 80 mm |
Length | 125 mm |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Hexagon/TX socket sets
Particle boards screw, csk head with end mill YP
x-tron ultra SDS-Max 4-cutter hammer drill bit
1/4 inch PZ recess bit
EVO HSS twist drill bit DIN 338
S 78 bonds and seals
Self-locking hexagon nut, DIN 985, strength class 8, galvanised
x-tron ultra SDS-Max 4-cutter hammer drill bit
RECA ultra machinist's hammer
SDS-plus flat chisel