Stud anchor, galvanised steel
B stud anchor, galvanised steel, M12 x 105-120/200
The perfect anchor for quick, reliable fixings in uncracked concrete and for suspended ceilings
Register now and access more than 10,000 products
The perfect anchor for quick, reliable fixings in uncracked concrete and for suspended ceilings
Application area:
For securing
supports, beams, metal structures, brackets, cable conduits, mounting rails, suspended ceilings etc.
to
non-cracked standard concrete with a strength class of ≥ C20/25 and ≤ C50/60.
Advantages:
- High permissible loads with low centre-to-centre distances and edge distances
- Quick and easy in-place installation
- Long thread for flexible use with various clamping widths
- Permissible reduced anchorage depths, e.g. in reinforced concrete or under reduced load
- Three effective anchorage depths for flexible use
Advice:
* Not covered by the approvals, ** Increased clamping widths at reduced anchorage depths with lesser loads
Datasheets(X)
Type description | B 12, 105-120/200 |
Anchor diameter x anchor length (l) | 12 x 200 mm |
Max. attachment height (t fix) | 105 mm |
Max. attachment height reduced (t fix, red) | 120 mm |
Nominal drill-bit diameter (d 0) | 12 mm |
Drill hole depth (h 1) | 90 mm |
Drill hole depth reduced (h 1, red) | 75 mm |
Embedding depth (h nom) | 82 mm |
Embedding depth (h nom,red) | 67 mm |
Effective anchoring depth (h ef) | 65 mm |
Effective anchoring depth reduced (h ef, red) | 50 mm |
Thread diameter x thread length (metric thread) | 12 x 100 mm |
Width across flats | 19 mm |
Material | Steel |
Material of bracing clip | Stainless steel A2 |
Surface | Zinc plated |
Anchor diameter | 12 mm |
Anchor length (l) | 200 mm |
Thread diameter | 12 mm |
Thread length (metric thread) | 100 mm |
Length | 200 mm |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Linch pin assortment case dia. 4.5-10 mm
Rapid flat-wire staple type 140
HSS DIN 338 twist drill bit
HSS DIN 338 twist drill bit
HSS DIN 340 twist drill bit
arecal Long Lub H1 high-pressure adhesive lubricant
speed-tron SDS-Plus hammer drill bit
Rotabroach cutters TCT
L-shaped TX key set, long version
Cloth sanding belts aluminium oxide