Stud anchor, galvanised steel

Name: Stud anchor, galvanised steel
Brand: RECA
SKU: 0909012105

B stud anchor, galvanised steel, M12 x 105-120/200
The perfect anchor for quick, reliable fixings in uncracked concrete and for suspended ceilings

Art.-no. 0909012105

EAN 4043315004161

All versions

Specification

The perfect anchor for quick, reliable fixings in uncracked concrete and for suspended ceilings

Application area:

For securing
supports, beams, metal structures, brackets, cable conduits, mounting rails, suspended ceilings etc.
to
non-cracked standard concrete with a strength class of ≥ C20/25 and ≤ C50/60.

Advantages:

High permissible loads with low centre-to-centre distances and edge distances

Quick and easy in-place installation

Long thread for flexible use with various clamping widths

Permissible reduced anchorage depths, e.g. in reinforced concrete or under reduced load

Three effective anchorage depths for flexible use

Advice:

* Not covered by the approvals, ** Increased clamping widths at reduced anchorage depths with lesser loads

Technical information

Type description	B 12, 105-120/200
Anchor diameter x anchor length (l)	12 x 200 mm
Max. attachment height (t fix)	105 mm
Max. attachment height reduced (t fix, red)	120 mm
Nominal drill-bit diameter (d 0)	12.00 mm
Drill hole depth (h 1)	90 mm
Drill hole depth reduced (h 1, red)	75 mm
Embedding depth (h nom)	82 mm
Embedding depth (h nom,red)	67 mm
Effective anchoring depth (h ef)	65 mm
Effective anchoring depth reduced (h ef, red)	50 mm
Thread diameter x thread length (metric thread)	12 x 100 mm
Width across flats	19 mm
Material	Steel
Material of bracing clip	Stainless steel A2
Surface	Zinc plated
Anchor diameter	12 mm
Anchor length (l)	200 mm
Thread diameter	12 mm
Thread length (metric thread)	100 mm
Length	200.0 mm

Documents

Product information

Datasheets (0)

Certificates/ Documents (0)

Accessory

Additive article:

Product

Description

Quantity

Price
/PU

Machinists hammer with ash handle DIN 1041

Machinists hammer DIN 1041 ash handle 500 g

Art.-no. 0695500004

x 1

Torque wrench with plug-in tool mount

RECA torque wrench 20–100 Nm, with interchangeable system 9x12 mm 375 mm

Art.-no. 0700502100

x 1

Small one-handed blow-out pump, dia. 70 mm

VM Multi blow-out bulb, Ø 70 mm 143 ml

Art.-no. 09127

x 1

The packaging unit (EU) indicates the number of items in a box, which corresponds to the packaging of the product. Here you specify the desired quantity of UE.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).