Thunderbolts Hexagon flange YP

Drill, screw in, done

The concrete screw anchor is an innovative anchoring system for securing assembly parts to concrete and other solid masonry. With its cutting-teeth design, the concrete screw anchor cuts a thread in the drill hole as it is screwed in, creating a connection with positive locking and no expansion pressure.

Advantages:

The original self tapping anchor, can be used on a whole range of construction materials including stone, brick and block.
The threaded anchor and self tapping action, allows for self anchorge, with the substrate becoming the nut to the bolt.
Quick and easy installation.
Can be installed nearer to the edge and closer together.
Completely removable, so ideal for temporary jobs.
Installation guide
1.Drill hole in substrate using correct diameter, ensuring the hole is deep enough to accomodate dust caused by threading action.
2. Remove and loosen dust from the hole.
3. Screw in the thunderbolt with a socket wrench.
4. Tighten the thunderbolt until the fixture is in place. If resistance is met unscrew one turn and re tighten.
5. For optimum performance a torque wrench should be used, do not exceed torque.