Torque wrench with turning knob and reversible ratchet head

• Trigger accuracy: ±3 % tolerance from the set scale value


• High level of repetition accuracy and precision for at least 5000 load cycles


• For controlled anti-clockwise and clockwise tightening


• Knurled turning knob on the reversible square drive for manual adjustment


• The actuation direction is changed by pushing the square drive through


• Dual scale in N•m and lbf•ft graduations for precise adjustment


• Includes finely divisible N•m micrometre scale for fine and precise adjustment


• Large viewing window with magnifying function for optimum readability


• Clearly audible and perceptible torque trigger thanks to quick-release function


• Robust 30-tooth ratchet mechanism


• Quick and reliable torque adjustment by turning the handle


• Secure locking feature on the handle


• Ergonomic and comfortable two-component handle with soft-grip zone


• Square drive in accordance with DIN 3120 - ISO 1174 with ball lock


• Individual serial number for clear product identification


• Includes certificate in accordance with DIN EN ISO 6789 - based on national standards

Advice:

Release the load after every application by twisting the torque mechanism to the 0 position.

The torque wrench must be inspected (calibrated) at specified intervals, as for every measuring tool.

Calibration certificates are valid for a maximum of 12 months from the time of commissioning. If the tool is used frequently,

this period should be reduced. A period should be specified after an assessment in accordance with DIN EN ISO 6789, section 5.3.2, after 5000 actuations.