VMU plus chemical injection mortar
VMU plus chemical injection mortar, 420 ml, coaxial cartridge with mixer nozzle
The universal injection system for cracked and non-cracked concrete, solid and perforated brick masonry and retrofitted reinforcement attachment (does not apply to the 300-ml cartridge)
Register now and access more than 10,000 products
The universal injection system for cracked and non-cracked concrete, solid and perforated brick masonry and retrofitted reinforcement attachment (does not apply to the 300-ml cartridge)
The VMU plus injection system is a bonded anchor system, comprising the two-component,
styrene free composite mortar VMU plus and various system components that must be used depending on the building material and application.
Field of Application:
For anchoring heavy loads such as steel beams, steel supports, brackets, awnings,
façades, canopies etc. in cracked and non-cracked standard concrete with a strength class ≥ C20/25 and ≤ C50/60, masonry made of solid brick and perforated brick.
Advantages:
- One chemical injection mortar for almost all applications means more flexibility,
- less stock and safer application
- Approved for cracked (M 8 to M 30) and non-cracked concrete (M 8 to M 30)
- Approved for retrofitted reinforcement attachment (dia. 8 to dia. 32)
- Approved for use in wet concrete and drill holes filled with water (M 8 to M 16)
- Approved for solid and perforated brick masonry
- Approved for commercially available threaded rods with a proof of strength (acceptance test certificate 3.1)
- Surface temperature during application: -10°C to +40°C (concrete)
- Ambient temperature when fully cured -40°C to +120°C (in concrete)
- Variable anchor depths for greater flexibility
- Fire protection test
- Opened cartridges can be used again with a new mixer nozzle
- Styrene-free 2-component vinyl ester-based mortar
- Approved for use during seismic activity in performance category C1 (M 8 to M 30)
- Products bearing the NSF logo have been tested and registered by the National Sanitary Foundation (NSF). NSF is the only international registration that guarantees that the product can be used in the food industry without posing health risks
Advice:
The tubular film cartridge (0911 003 300) must be cut open before use. To do this, pull the foil on the thread outwards and cut using scissors.
Type description | VMU plus chemical injection mortar 420 |
Chemical basis | Vinylester, styrene free |
Content remark | Coaxial cartridge, incl. mixer nozzle |
Shelf life from production | 18 Month |
Contents | 420 ml |
Number of pieces per covering box | 12 PCS |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Hexagonal bolt DIN 933 8.8, galvanised
arecal cooling lubricant concentrate
Silicone carbide paper roll
x-tron ultra SDS-Max 4-cutter hammer drill bit
Mirka Goldflex 115 x 125 roll
Hexagonal bolt DIN 933 8.8, galvanised
ultra through hole machine tap
TX+PZ+PH bit set, 10 pieces
ultra INOX HSS-Co twist drill bit DIN 338
Varius reversible ratcheting wrench set
