Varius angled reversible ratcheting combination wrench
Varius ratchet spanner, reversible AF 17
Register now and access more than 10,000 products
15° angling for improved freedom of movement
The reverse function does not affect the slim Varius head
The low height of the slim ratchet tool head is not impaired by the slim reverse lever
RECA Varius wrenches provide all the advantages of a ratchet tool and much more besides!
All RECA Varius wrenches feature fine toothing - the 72 teeth allow a swivelling angle of only 5° (a coarsely toothed ratchet requires 10°, a standard combination wrench at least 30°!). You simply need less space to work in!
The slim socket end enables working in the tightest spaces, even those too small for ratchet tools and sockets.
Torque values even exceed DIN standard 3110 for standard combination wrenches (no ratchet function).
As with all RECA tools, the socket end of Varius wrenches grips the faces of screws and nuts instead of the edges. This prevents slipping or jumping!
Extra accessories convert the RECA Varius into a real ratchet for sockets or bits within seconds!
Advice:
This special tool may only be loaded to the maximum torque values. For this reason, the wrenches (ring side) are only suitable for loosening screws in certain circumstances.
Width across flats | 17 mm |
Length | 230.0 mm |
Height | 10.3 mm |
Design | Offset, Switchable |
Datasheets(X)
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
sebS zinc-plated hexagon head self-drilling screw similar to DIN 7504-K
EVO HSS twist drill bit DIN 338 - cassettes
Vulcanised fibre disc with optimised ceramic abrasive grain
VISO system empty boxes
VISO case 8.4.x TR incl. empty boxes/empty
arecal Long Lub H1 high-pressure adhesive lubricant
sebS drilling screw, PH pan head, sim. to DIN 7504-N galv
sebS drilling screw, PH pan head, sim. to DIN 7504-N galv
Cutter 18 mm
ultra Autolock utility knife 18 mm
