arecal 2-component adhesive, methyl methacrylate
arecal 2-component adhesive, methyl methacrylate, cream-coloured, 50 ml
Register now and access more than 10,000 products
Two-component structural adhesive for metal connections, connecting modern plastics that are difficult to bond and bonding various material pairings (e.g. metals and plastics) to themselves and each other.
Application area:
Suitable materials:
Metals
Aluminium (anodised and ground), brass, stainless steel, iron, cast iron, copper, steel (electrogalvanised, hot-dip galvanised, galvanised, phosphated, and sand-blasted).
Plastics:
ABS, PA, PC, PMMA (acrylic glass), polyester, PUR.
Composite and other materials:
GFRP, carbon, EPDM, silicon carbide, glass, granite, wood, ceramics, natural stone, marble.
Advantages:
- High tensile shear strength.
- Excellent reworkability (sanding, drilling, painting etc.).
- Excellent resistance to chemicals.
- High temperature resistance (-50°C to +120°C).
- Non-dripping (thixotropic).
- Fills cracks and gaps up to 4 mm
- UV-resistant
Advice:
Application instructions:
Open the cartridge and attach the static mixer. Before application, extrude a small amount (2–3 cm) and discard. The product is then ready to use and should be applied immediately as a thin film or in beads or droplets.
It is always necessary to clean surfaces thoroughly. Due to the wide range of possible applications for the various products and the respective special conditions (e.g. application parameters, material properties, system structure etc.), users are obliged to carry out their own tests.
Metalworking industry:
For bonding sheet metal, frames and braces, attaching brackets, metal reels,
struts/repairing holes and cracks.
Constructing plants, moulds and machines:
Structural bonding of various metal and composite workpieces, pipe bonding, bonding sealing lips, attaching trim and decorative borders
Air-conditioning and power technology:
Ventilation ducts, cable ducts
Window construction, glass processing:
Window frames, corner frames, bonding corner angles
Maritime applications, shipbuilding:
Deck/hull bonding tasks, bonding interior fittings
Wind and solar energy:
Bonding steel strips to blade edges, positioning lightning receptors, cable ducts
Plastics industry:
Positioning fixings (clips), bonding metal components to flexible plastic components, attaching trim and decorative borders
Automotive, trucks & transport:
Bonding trims and covers, GFRP components in front and rear areas, bonding GFRP components to steel, aluminium components to steel, carbon elements to steel, headlight brackets, plastic cover panels and housings, bonding roof components, positioning braces, attaching rear spoilers
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
ultra Autolock utility knife 18 mm
Inlay for empty case
Hydraulic grip nozzle
sebS drilling screw, PH pan head, sim. to DIN 7504-N galv
HSS DIN 340 twist drill bit
Hexagon head bolt DIN 933 A2
Automatic wire stripping pliers Multi Strip 10
Illbruck LD410 duct sealant
EVO HSS twist drill bit DIN 338
arecal medium-strength screw retainer