arecal RTV silicone
arecal RTV silicone, black, 200 ml
Register now and access more than 10,000 products
Neutral-curing 1-component RTV silicone.
Field of Application:
arecal RTV silicone is typically used as an adhesive and sealant, wherever warm and cold surfaces have to be bonded or sealed, or where components need to be protected from external influences (vibrations, impact, water, chemicals).
Typical applications include:
Bonding and sealing in household appliance manufacture (e.g. ovens, ceramic hobs), sealing electronic components (e.g. rechargeable battery packs), sealing engine components (e.g. intake systems, oil pumps, oil sumps, camshaft bearing covers, transmission covers, front covers).
Advantages:
- Minimal odour.
- Non-corrosive.
- High temperature resistance.
- Very good chemical resistance.
- Very easy to work with due to propellant filling.
Advice:
This information is only a recommendation based on our experience. Users must always conduct tests before using the products.
Datasheets(X)
Type description | arecal RTV silicone |
Contents | 200 ml |
Colour | Black |
Density | 1.25 g/cm³ |
Min./max. temperature conditions | -60 to 260 °C |
Max. short-term temperature conditions | 300 °C |
Min./max. viscosity /conditions | 60000-80000 mPas / at 25°C |
Breaking elongation | 550 % |
Relative permittivity | 2.8 |
Conditions for relative permittivity | 1 MHz, ASTM D-150 |
Full curing speed | 3 mm/d |
Fully hardening/curing conditions | 23°C and 50% relative humidity |
Shore A hardness | 30 |
Min./max. skin-formation time | 5-10 min |
Max. volume shrinkage | 7 % |
Coefficient of thermal expansion | 0.0002 1/K |
Coefficient of thermal expansion conditions | in accordance with ASTM EB-31 |
Tensile strength | 2 N/mm² |
Last viewed
Ejector drift for morse taper
Economy skeleton gun
Stud anchor B, HDG
Wave Longblade jigsaw blade
x-tron ultra SDS-Max 4-cutter hammer drill bit
MULTI screwdriver blades
Soft-face hammer, non-recoil
arecal H1 high-grade steel care
ultra INOX HSS-Co twist drill bit DIN 338
Hexagonal bolt DIN 933 8.8, galvanised