diadrill 1/2 inch wet diamond core drill bit, usable length 320 mm
diadrill diamond core drill, wet, 1/2", usable length 320 mm, 30 mm
Register now and access more than 10,000 products
Wet core drill bit with 1/2 inch drive arbor for use on core drills with water cooling.
Laser-welded diamond wet core drill bits with 10 mm usable diamond layer.
Application area:
Can be used with water cooling in all common building materials, particularly concrete, reinforced concrete, sand-lime brick, masonry etc.
Field of Application:
For direct mounting in all common drill presses with 1/2 inch thread.
Other machines can be used with the aid of an adapter.
Advantages:
RECA wet core drill bits are equipped with self-sharpening top segments. The diamonds in the segments cut freely as soon as they are first applied, so the core immediately achieves full performance and cutting performance.
Advice:
When mounting the 1/2 inch diamond core drill bits, placing a copper ring size 14x18 (article number 0460 14 18) makes it easier to disassemble later!
Datasheets(X)
Diameter | 30 mm |
Connection thread | 1/2 inch |
Length | 365 mm |
Effective length | 320 mm |
Segment height | 10 mm |
Effective diamond section | 10 mm |
Segment thickness | 2.5 mm |
Number of segments | 1 |
Last viewed
RECA 1/4 in socket wrench terminal block
Diamond drill bit diadrill ceramic with hexagon shank
Nullfire FS702 fire rated acrylic
Toolbox XL
HSS-Co twist drill bit DIN 1897
1/4 inch HSS countersink bits with 3 cutters 90° set
Quintus pliers
HSS DIN 1897 twist drill bit
ultra safety cutter
HSS DIN 340 twist drill bit