diamop AERO Turbo diamond grinding cup for finishing and fine grinding
diamop diamond grinding cup Turbo, for finishing and fine grinding, 50 mm/M 14
Register now and access more than 10,000 products
The enclosed Turbo diamond layer ensures an extremely clean grinding finish!
Application area:
Diamond grinding cups are used for machining the surface of stone and concrete materials. Can be used in commercially available angle grinders or in special concrete grinders that are equipped with enclosed extraction devices (e.g. BOSCH GBR 14CA).
For removing formwork residues, concrete projections, paint, graffiti, tar coatings and even thin plastic coverings (up to approx. 3 mm)
Field of Application:
For use on natural stones such as granite, marble etc. For finishing and fine grinding.
Advice:
Recommended for use with special concrete grinders with integrated dust extraction system, such as the BOSCH GBR 14 CA concrete grinder. This excludes the 0662 641 150, which only fits the Hilti DG150 concrete grinder.
Diameter (Durchmesser) | 50 mm |
Connection thread | M14 |
Overall height | 26 mm |
Segment height | 5 mm |
Weight | 200 |
Material to be processed | Natural stone, Granite, Concrete |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Countersunk head screws, ISO 10642 10.9, galvanised
Countersunk head chipboard screw, yellow zinc plated, TX
Rapid flat-wire staples type 140
Pan head screw, DIN EN ISO 7380-1 10.9, galvanised
Pan head screw, DIN EN ISO 7380-1 10.9, galvanised
Countersunk head screw, DIN 965 4.8, zinc plated
Hexagon nut DIN 934 strength class 8, zinc plated
Hexagon nut DIN 934 strength class 8, zinc plated
Hammer drill bit x-twin ultra
Accessories for angle grinders and hand-held circular saws
