ultra HSS-O twist drill bit - HSS-O ultra twist drill, 6.0 mm

ultra HSS-O twist drill bit - HSS-O ultra twist drill, 6.0 mm - 1

ultra HSS-O twist drill bit - HSS-O ultra twist drill, 6.0 mm - 2

ultra HSS-O twist drill bit - HSS-O ultra twist drill, 6.0 mm - 3

ultra HSS-O twist drill bit

Name: ultra HSS-O twist drill bit
Brand: RECA
SKU: 062060

HSS-O ultra twist drill, 6.0 mm
The universal model

Art.-no. 062060

EAN 4029484253296

All versions

Specification

The universal model

Twist drill with straight shank, short, DIN 338, type N, right-hand cutting, HSS-O

Advantages:

Ideal for power tools

Reduced chip warping: Reduced power consumption and less frictional heat

Utilizes 100% of the output of power tools

Top quality

Long service life

Elasticity according to the most recent findings

Optimised breakage resistance with all diameters

Can be reground

Turbo cutter

50% faster than conventional twist drills owing to tip angle of 135°

No centre punch required

Drills all conventional materials in the trade sector such as steel, stainless steel, aluminium, brass, copper, plastics

Coating

The multifunctional steam oxide (Fe2 O4) coating is an adhesive oxide coating with a thickness of 0.010 mm and offers the following advantages:

Improved adhesion of cooling lubricant on the drill surface prevents built-up edges and cold shuts.

Improves chip discharge from the cutter - reduced heat development in the critical zone.

Increased surface hardness - thus improved wear resistance.

Advice:

From ø 13.5 mm shaft twisted off to ø 12.7 mm

Technical information

Diameter	6.0 mm
Length	93.0 mm
Chip flute length	57.0 mm

Documents

Product information

RECA Catalogue

Datasheets(X)

Certificates/ Documents

Accessory

Additive article:

Product

Description

Quantity

Price
/PU

EVO twist drill, DIN 338 HSS, 6.0 mm

Art.-no. 0623000060

x 5

Twist drill, DIN 340 HSS, 6.0 mm

Art.-no. 062960

x 10

Conical countersink, HSS, three 90° flutes 16.5 mm

Art.-no. 0692390165

Conical and countersink deburring tool with three cutters 90°, HSS-CBN deep-ground, DIN 335 type C, with straight shank

x 1

Stepped drill bit, 4–30 mm

Art.-no. 0692713630

HSS-CBN deep-ground, with straight shank, with laser scaling (DBGM)

x 1

arecal BIOCUT drilling and cutting fluid 400 ml

Art.-no. 0896413400

x 1

The packaging unit (EU) indicates the number of items in a box, which corresponds to the packaging of the product. Here you specify the desired quantity of UE.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).