ultra HSS-O twist drill bit
HSS-O ultra twist drill, 6.0 mm
The universal model
Register now and access more than 10,000 products
The universal model
Twist drill with straight shank, short, DIN 338, type N, right-hand cutting, HSS-O
Advantages:
- Ideal for power tools
Reduced chip warping: Reduced power consumption and less frictional heat
Utilizes 100% of the output of power tools
- Top quality
Long service life
Elasticity according to the most recent findings
Optimised breakage resistance with all diameters
Can be reground
- Turbo cutter
50% faster than conventional twist drills owing to tip angle of 135°
No centre punch required
Drills all conventional materials in the trade sector such as steel, stainless steel, aluminium, brass, copper, plastics
- Coating
The multifunctional steam oxide (Fe2 O4) coating is an adhesive oxide coating with a thickness of 0.010 mm and offers the following advantages:
Improved adhesion of cooling lubricant on the drill surface prevents built-up edges and cold shuts.
Improves chip discharge from the cutter - reduced heat development in the critical zone.
Increased surface hardness - thus improved wear resistance.
Advice:
From ø 13.5 mm shaft twisted off to ø 12.7 mm
Datasheets(X)
Diameter | 6 mm |
Length | 93 mm |
Chip flute length | 57 mm |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
