ultra INOX HSS-Co twist drill bit DIN 338
ultra INOX twist drill, DIN 338 HSS-Co, 3.5 mm
Register now and access more than 10,000 products
Twist drill with TRICON shaft, short, type W, right-hand cutting, cross grinding, DIN 338, HSS-Co 5%
Field of Application:
Especially suitable for hard materials such as rust, acid and heat-resistant austenitic steels (A2 + A4), titanium and aluminium alloys with a strength of up to 850 N/mm². Optimal performance with a material thickness of up to 5 mm.
Advantages:
- 135° turbo cutter with cross grinding
No centre punch required
Fastest drilling progress
Drilling on curved surfaces — excellent drilling properties
Reduction of contact pressure
- 40° twist angle
Particularly suitable for battery powered and hand-held drills
Dimensional accuracy: perfectly round holes right to the end
- Green ring for stainless steel
Simple material assignment — no confusion; suitable for machine taps and countersinks
- Black and gold heat treatment
Reduced thermal load on drill
- TRICON shaft
Prevents movement in the drill chuck — therefore no damage to drill
Positive locking in drill chuck
Securely and firmly clamped, particularly in the quick-action drill chuck
Optimal power transfer to the tip where the power is needed
Advice:
From 3.0 mm with black/gold surface finish. From 4.0 mm with TRICON shaft
Datasheets(X)
Diameter | 3.5 mm |
Length | 70 mm |
Chip flute length | 39 mm |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Thunderbolt countersunk torx YP
Cone grease nipple H1, type A
HSS-Co twist drill bit DIN 1897
1/4-inch angled screwdriver attachment, E 6.3
SL 200 split cowhide leather protective glove
Hammer core drill bit ratio - adapters and accessories
Harris ultimate brushes for walls & ceilings, set
x-tron ultra SDS-Max 4-cutter hammer drill bit
x-tron ultra SDS-Max 4-cutter hammer drill bit
x-tron ultra SDS-Max 4-cutter hammer drill bit